Extract Controllers Not Working with Master Properties
Posted: Wed Mar 25, 2020 5:39 pm
I have a simple arm rig as a test. It has a single controller. I put this "Rig Comp" in another comp "Main Comp". Then inside "Main Comp" I highlight "Rig Comp" and click the extract controllers button with Master Properties selected. It seems to work but the controller does not move the rig. If I extract controllers using expressions, then the controller moves the rig.
I tested this multiple times with different rigs. Not sure what is going wrong. I attached a file with two simple arm rigs. One is extracted with expressions and one is extracted with Master Properties.
Not sure why it doesn't work.
Project File Link
https://drive.google.com/open?id=1muWHC ... Qa_8ftczij
I tested this multiple times with different rigs. Not sure what is going wrong. I attached a file with two simple arm rigs. One is extracted with expressions and one is extracted with Master Properties.
Not sure why it doesn't work.
Project File Link
https://drive.google.com/open?id=1muWHC ... Qa_8ftczij