Custom Robot Rig Issue

Rigging, animation, import/export of characters, props and cameras comprehensive tool set for After Effects.
Forum rules
Please read these rules and advices before posting.
  • Before you ask any question about a tool, to avoid duplicates, please:
    1. Search for a solution in the available documentation for the tools.
    2. Some video tutorials and quicktips are available.
    3. You can make a search to see if your question has already been asked.
  • Thank you for giving a detailed and precise title to your topics, to help searching in the future.
  • We're very few people to manage this forum, please be patient if we're a bit long to answer.
  • Don't hesitate to answer to other people's questions! The goal of this forum is not only to have the Rainbox team answer users' questions, but to have everyone sharing and helping each other.
  • Finally, please always be polite, and keep in mind that all we want is sharing techniques and knowledge, helping each other.
Post Reply
YourFriend
Posts: 7
Joined: Tue Jan 28, 2020 11:05 pm

Custom Robot Rig Issue

Post by YourFriend » Tue Jan 28, 2020 11:14 pm

Hello.

I'm using Duik 2.0 and trying to rig a robot following the 9 hour tutorial for 1.6.

My issue is. I set up a custom structure, link layers to structure. When I hit auto-rig I get one controller at the foot on the custom structure that then just move everything around when I adjust the positioning. According to the tutorial it should link things properly. I'm fairly new so I'm sure its a user error. If anyone has any tips or solutions I'd be very grateful.

Thank you,
Your Friend
Attachments
Screen Shot 2020-01-28 at 4.11.04 PM.png
Screen Shot 2020-01-28 at 4.11.04 PM.png (119.81 KiB) Viewed 2297 times
Screen Shot 2020-01-28 at 4.10.55 PM.png
Screen Shot 2020-01-28 at 4.10.55 PM.png (138.51 KiB) Viewed 2297 times
Screen Shot 2020-01-28 at 4.10.43 PM.png
Screen Shot 2020-01-28 at 4.10.43 PM.png (84.92 KiB) Viewed 2297 times
Last edited by YourFriend on Mon Feb 03, 2020 6:44 pm, edited 1 time in total.

YourFriend
Posts: 7
Joined: Tue Jan 28, 2020 11:05 pm

Re: Custom Robot Rig Issue

Post by YourFriend » Wed Jan 29, 2020 2:28 am

Taps microphone... ... .. .

AaronSugar
Posts: 7
Joined: Fri Nov 22, 2019 8:07 pm

Re: Custom Robot Rig Issue

Post by AaronSugar » Fri Jan 31, 2020 3:26 pm

I'm not sure of the issue. When you rig auto-rig a leg, you get one controller shaped like a foot that will control the whole leg structure.

YourFriend
Posts: 7
Joined: Tue Jan 28, 2020 11:05 pm

Re: Custom Robot Rig Issue

Post by YourFriend » Mon Feb 03, 2020 11:34 pm

Hello. Thank you for your reply. I did figure it out. I tried deleting this but I had already replied to my own thread preventing me from deleting. Thank you again.

Post Reply