Hi,
I have finally completed the rig of the project that I'm working on but am now discovering that extracting the Master Properties is throwing up a bunch of expression errors (see attached image).
It's looking for layer named "C | Connector" but the layer is there in the pre-comped rig. I've been trying desperately to figure out what's going on here but am not managing to get to the bottom of this.
Any help would be hugely appreciated. I can upload a copy of the project if that helps.
Many thanks.
This forum has been permanently closed and archived; you can still access all content but can't post anymore.
Of course, you can still join us in other places!
To get support and talk about RxLaboratory and with the team, come here: https://rainboxlab.org/support/
Of course, you can still join us in other places!
To get support and talk about RxLaboratory and with the team, come here: https://rainboxlab.org/support/
Expression Erros when extracting Master Properties
Re: Expression Erros when extracting Master Properties
Hi,
This may be because the "C | Connector" controller is not extracted for some reason but some expressions look for it outside of the precomp. I'm not sure though, just send me the project and I'll have a look at that.
Apart from these errors, does the rig work correctly ?
This may be because the "C | Connector" controller is not extracted for some reason but some expressions look for it outside of the precomp. I'm not sure though, just send me the project and I'll have a look at that.
Apart from these errors, does the rig work correctly ?
Re: Expression Erros when extracting Master Properties
Hi Duduf,
Thanks for getting back to me on this. Yes, the rig prior to extracting is working fine. I've uploaded the project here: https://www.dropbox.com/sh/nshizqk4whtf ... uGmHa?dl=0
Many thanks
Thanks for getting back to me on this. Yes, the rig prior to extracting is working fine. I've uploaded the project here: https://www.dropbox.com/sh/nshizqk4whtf ... uGmHa?dl=0
Many thanks